Permeation and Polymers : Mecadi GmbH : Permeation Measurement Supplies

Measurement Unit Permeation Film (Steel) Mecadi

Description

Measurement cells made of steel take up flat samples like foils, films or plates. Other geometries (tubes, connections,O-Rings..)on request. They are used when media under high pressure and/or temperature are present.

The Measurement Unit (Steel) is a product of the Mecadi GmbH, Made in Germany.

Characteristics

Available ISO/ ASTM /DIn conform or according customer specification. For liquids and gases. Material selection dependent from media and applied conditions. Sealings, fittings as as accessories or complete system available.

Principle

Mecadis steel permeation measurement cell consists in principle of two half cells. The specimen is mounted inside the cell. One side is contacted with the test media. Permeation media is detected on the secondary side.

Technical Data

Available are cells constructed for high flows (membranes) or cells especially designed for barrier materials. Cells are designed and manufactured customer specific. Please define your needs like sample diameter and operation conditions.