A
Acidic Acrylic-acid-ionomers of ethyleneAcrylic glass
Acrylic-Butadiene-Styrene-copolymers (ABS)
Acrylic-nitrile-Butadiene-Rubber (Buna-N) (NBR)
Acrylic-nitrile-Methyl-Acrylate-copolymers (AMA)
Acrylic-nitrile-Styrene-Acrylic-ester-polymer-alloy (ASA)
Activation energy
Arrhenius equation
ASTM
B
BarrierBarrier Coating
Barrier Packaging
Biotechnology
Bisphenol A
Bromine-butyl-Rubber (BIIR)
Butadiene-Rubber (BR)
C
Carboxylated-Nitrile-Butadiene-Rubber (XNBR)Catalysis
Catalyst
Cellulose Acetate (CA)
Chemical
Chemie
Chlorine-Sulfonated-Polyethylene (CSM or CSPE (ASTM denomination))
Chloro-isobutene-isoprene rubber (Chlorobutyl Rubber, CIIR)
Chloroprene-Rubber (CR)
combinatorial chemistry
Composite
Composite Hose
Cyclic Olefine Copolymers (COC)
D
DiffusionDiffusion coefficient
Diffusion rate
Diffusion, facilitated
DIN
Drying of gases
E
E-85 FuelElastomers
Epichlorohydrin-Rubber (CO and ECO; CO = homopolymer; ECO = copolymer)
Epoxy Resins (EP)
Ethylen-Acrylate-rubber (AEM)
Ethylene-Acrylate Copolymer (EAR)
Ethylene-Acrylic-Acid-copolymer (EAA)
Ethylene-Chlorotrifluoroethylene-Fluorocopolymer (ECTFE)
Ethylene-Propylene-(Diene-)Rubber
(EPM and EPDM; EPM = copolymer; EPDM = terpolymer)
Ethylene-Tetrafluoroethylene-Hexafluoropropylene-Fluoroterpolymer (EFEP)
Ethylene-Vinyl-Acetate-Copolymers (EVA)
Ethylene-Vinyl-Alcohol-Copolymer (EVOH)
Ethylene–Tetrafluoroethylene-Fluorocopolymer (ETFE)
F
Facilitated diffusionFAM A
FAM B
Feed
FFKM (perfluorinated rubber)
FKM (Fluoroelastomers)
Fluoro-Silicone-Rubbers (MFQ or FVMQ)
Fluoroelastomers
fluoropolymers
Fluororubber (FPM)
Foamable polystyrene (EPS)
Fuel
Fuel C
Fuel Cell Technology
Fuel Tank Technology
Functionalised polymers
G
gas permeabilitygas seperation
glass transition temperature (Tg)
Granule
H
High Density Polyethylene (HDPE)High-Density-Polyethylene, HDPE (hard PE)
Hydrogenated Polyacrylic-Nitrile Butadiene (HNBR)- EPM (copolymer); EPDM (terpolymer)
hygroscopic
I
IonISO
ISO 4593
ISO/DIS 15105-1
Isobutene-Isoprene-Rubber (IIR)
Isoprene-Rubber (polyisoprene IR)
J
Jet Fuel RFL
LaminateLiquid-Crystal-Polymers (LCP)
Low Density Polyethylene (LDPE)
M
M 25Melamine-Formaldehyde (MF)
Membrane
MIL-C-7024E, type III
multilayer film
N
Nafion (copolymer made from PTFE and perflourinateNatural Rubber (NR)
P
ParylenePerflourated-dimethyl-dioxole/Tetraflourinated-eth
Permeability
Permeat
Permeation cell
Permeation measurement cell
permeation rate
Permeation Rate Measurement
Permeation tubes
Permeationskoeffizient
Phenolic plastics, phenoplastic moulding compounds (PF)
Poly-acrylic-acid
Poly-acrylic-acid-amide
Poly-Acrylic-Nitrile (PAN)
Poly-Benzimidazole (PBI)
Poly-Ether-Ether-Ketone (PEEK)
Poly-Methyl-Methacrylate (PMMA)
Poly-Phenylene-oxide (PPO)
Poly-Phenylene-sulfide (PPS)
Poly-Vinylacetate
Poly-Vinylalcohol (PVA)
Poly-Vinylchloride (PVC)
Poly-Vinylidene-Chloride (PVDC)
Polyacetal or Polyoxymethylene (POM)
Polyamide (PA)
Polyamide-Imide (PAI)
Polyarylate (PAR)
Polybutene (Polybutylene, PB)
Polybutylene-Terephthalate (PBT)
Polycarbonates (PC)
Polychlorinated Terphenylenes (PCT)
Polychloroprene (CR)
Polychlorotrifluoroethylene (PCTFE)
Polycyclohexylenedimethylene-Ethylene-Terephthalat
Polyesterurethane (AU)
Polyether-Block-Amide (PEBA)
Polyetherimide (PEI)
Polyethersulfone (PESU)
Polyetherurethane (EU)
Polyethylene (PE)
Polyethyleneglycol
Polyethylenenaphthalate (PEN)
Polyethylenesuccinate (PES)
Polyethyleneterephthalate (PET)
Polyimide (PI)
Polyisobutylene (butyl rubber)
Polyketone (PK)
Polymer
Polymer alloy
Polymer blend
Polymer characterisation
Polynorbornene (PNB)
Polyorganophosphazene (PPZ)
Polypropylene (PP)
Polystyrene (PS)
Polysulfide rubber (SR)
Polysulfone (PSU)
Polytetrafluoroethylene (PTFE)
Polyurethane-Foam (PUR)
Polyvinylfluoride (PVF)
Polyvinylidenefluoride (PVDF)
Pouch Method
R
ResinRetentat
RFID
S
semipermeableSilicone (SI)
Silicone-Rubber (MQ, PMQ, PVMQ, VMQ)
Solvent
Structure formula FKM-baseresistant elastomeres
Structure formula FKM-copolymer
Structure formula FKM-low temperature elastomere
Structure formula FKM-terpolymer
Styrene-Acrylic-Nitrile-Copolymer (SAN)
Styrene-Butadiene-Block-Copolymer (SBS)
Styrene-Butadiene-Copolymer (SB)
Styrene-Butadiene-Rubber (SBR)
Synthetical Resin
T
Tetrafluorinated ethylene (TFE)Tetrafluoroethylene-Hexafluoropropylene-Copolymer (FEP)
Tetrafluoroethylene-Hexafluoropropylene-Vinylidenefluoride- Fluoroterpolymer (TFB)
Tetrafluoroethylene-Perfluorodimethyldioxole- Fluorocopolymer (TFE/PDD)
Tetrafluoroethylene-Perfluoropropylevinylether-Fluorocopolymer (PFA)
Tetrafluoroethylene-Perfluorovinylsulfonicacid- Fluorocopolymer (TFE/PVS)
TF 1
TF 2
TF 3
Thermoplastic
thermoplastic Polybutadiene-Elastomer (TPE)
Thermoset
Time-lag
Transponder
U
Ultra Low Density Polyethylene (ULDPE)V
Vinylfluoride Tetrafluoroethylene Fluorocopolymer (VF/TFE)Vinylidenefluoride Hexafluorobutylene Fluorocopolymer (VDF/hexafluorobutylene)
Vinylidenefluoride Trifluoroethylene Fluorocopolymer (VDF/TrFE)
Vinylidenefluoride-Chlorotrifluoroethylene-Fluoropolymer (VDF/CTFE)
Vinylidenefluoride-Hexafluoropropylene-Fluorocopolymer (VDF/HFP)
Fluoro-Silicone-Rubbers (MFQ or FVMQ)
German translation
FluorsilikonkautschukeManufacturer and Trade Name
|
DuPont General Electronic Company |
Sialstic® FSE® |
Description
Nomenclature: MFQ according to ISO 1629 ("Rubber and latices – Nomenclature") or FVMQ according to ASTM 1418 ("Practice for Rubber and Rubber Latices — Nomenclature"); high temperature resistant up to +200°C and more, less resistant to chemical compunds and solvents than FPM, flexible at low temperatures. The polysiloxane-backbone can contain methyl-, vinyl- and flourine-functionalised side chains.Fluorosilicones combine the high- and low-temperature properties of silicones with the resistance to oils and fuels of fluoropolymers. The fluorosilicones offer a larger service temperature range as the fluorocarbon elastomers (FKM’s). O-rings made of fluorosilicone are mainly used in high temperature fuel-systems in which silicone has to be resistant to dry heat. O-rings made of fluorosilicone can also be exposed to petroleum-based oils and/or hydrocarbon-containing fuels. By the utilisation of some oils and fuels it is recommended to reduce the maximum service temperature, because the decomposizion of the fluorosilcones, starting at 200°C, liberates acids which can attack on their part the material. In low-temperature domains the fluorosilicone o-rings can be used till –73°C. Due to the slight tensile-strength, the high friction coefficient and the unsatisfactory wastage properties, fluorosilicone o-rings are recommended in general only for static applications, however fluorosilicones with high tensile strength are also obtainable. Some of these compounds show an improved compression set rest. Many fluorosilicone-compounds possess an outstanding high shrinkage-rate. Due to the diversity of the fluorosilicones the fabrication-forms of the fluorsilicones differ from that of other fluorocarbon elastomers.
Usage
- aeronautical application
- high temperature resistant coolant tubes for trucks
- membranes
- sealings
- application involving resistance to fuels, oils and solvents
Formula

